The choice of housing has helped enormously as it gives me a decent set of physical parameters to work too with the design of the internal structure was governed by the required inputs and outputs.
1. a method of dispensing the nuts (e.g. motor)
2. a method of checking that the nuts are there.
3. a way of signaling to the wildlife that food is present.
4. a way of finding out if the nuts are gone.
5. A way of detecting if the feeder is being visited.
It would also be helpful if there was a method of filming the feeding either from the actual feeder itself or remotely from an unconnected camera.
I’d like to be able to have a configurable method of linking the different inputs and outputs together and the raspberry pi was the easy choice – its pretty small but more importantly I’ve got one so no further outlay!
I will need to create a way of running the pi outside so it will need a battery along with either some way of communicating (e.g. VNC) or to be totally autonomous..
I’m no programmer however as a child I enjoyed my acorn electron as well as having access to a BBC B and and Arc 440, reaching my programming pinnacle aged 11! A few years later I’m drawing on this skill and so would like the project to run using BASIC on RISC OS – mainly as I’m most familiar with the language (although I’m very poor at it) but also because RISC OS just seems to work so well on the pi. The issue with this is that it doesn’t support simple wi-fi dongles and getting VNC to work appears to be pretty tricky.
Finally the whole system needs to be both watertight (in case of showers) and reliable (so that I don’t keep disturbing the wildlife by resetting it every few minutes).
I’ve looked online to see if there was anything commercially available that I could either buy or use the ideas from – the closest was this as posted on the Raspberry pi website:
With our squirrels and jays becoming a bit more used to our presence I though it would be fun to create an automatic feeder. Rather than simply dispense nuts the idea was to get them to work for it and to see what they see in terms of colours. Initially this consisted of a coloured l.e.d. that showed if a nut was present (e.g. red for none, green for present etc) with the nut being obscured so they could only tell via the colours.
I have grown this idea in my head to the point where I thought it would be fun to construct a dispenser that had several functions and then use them in a modular fashion to create various scenarios for the creatures to go through before they received the prize.
This idea was left for a while until my niece & nephew gave me a bird house for my birthday – unfortunately it is not possible to put up a permanent bird house in our communal gardens but the shape of it made me think that I could build my dispenser inside – so I did!
The following posts show how I am going through the design and build of this project.
I’ve spent a few days relearning how to solder and put together a small project for my raspberry pi – a breakout board.
The idea is to have the GPIO pins easily accesible whilst providing each with a bit of protection from mistakes when wiring – specifically to have each behind a resistor as well as a zener diode to stop passing too much current through the pin (check out the links below for a more accurate description!)
It is designed by Mike Cook (the same chap who did all the interesting stuff for the BBC B in micro user) and he has full instructions on his website here
He also has some excellent further projects and really handy information about the pi – well work keeping an eye on his site for further updates: website
I have made a couple of very minor alterations so that I can use the materials that were to hand – Mike’s version has a very neat wire layout however I didn’t have anything thin enough to allow for 2 connections in the same hole – hence the messy and multicoloured wires!
Its a simple project and I thought that it would handy to teach me how to get soldering and read circuit diagrams – in the end it worked perfectly however it was let down by my rubbish soldering skills and general poor level of quality control.
(I’m not going to show a photo of the back as it looks like a baby transformer has spluttered his solder based dinner all over i!t)
At least I’ve now learnt how to trace faults and rectify them as well as use my meter and soldering iron more effectively. As with all things Pi I bought it to tinker with and to enjoy learning new skills and it has not disappointed.
Toady I’ve been experimenting with 2 webcams to film the bird feeder. Unfortunately its a bit wet so not much happening however at least I’ve been able to test some things…..
Here’s a pic of the setup – a microsoft webcam on the window cill with a logitech blue-tacked to a telescope!
Both are linked to the computer running i-spy using motion triggers so they automatically record when something happens (they have to be pretty sensitive to capture such small objects so most of the videos are of twitching leaves!)
The link below goes to my first test of the system where I’ve got the times to tally up when editing.
Based on an article in the latest magpi online magazine – http://www.themagpi.com/ I’ve had a go at using the GPIO to control LED’s.
After a bit of fiddling around (rectifying my own mistakes with a wrong resistor!) I managed to get the type in program to work – basically you press the switch then the red LED produces between 1 and 6 flashes to represent a dice.
It was quite tricky to see when the counting started and stopped so with the help of a multitude of websites and python programming guesswork I fitted a further green LED to another of the IO pins. The alteration gives a green light to show it is on. When the switch is pressed the green light goes off and the red LED gives the flashes…. when done it goes back to green.
Its all very basic stuff and laughably useless (!) but I am really pleased that my first step in programing and electronics has resulted in something that works.
Here is a video so that you can witness the excitement (?) in real time:
Our quick walk turned in to a 4 hour stroll-a-thon around places we’d always wanted to see.
First up was Bourne End – having both worked at the marina on the thames with the same name we’d both always wanted to visit the one on the grand union canal.
Both have got a railway nearby, bot have an interesting crossing to get to the site and both have quality cranes!
We popped in to see Berkhamsted castle on the way back too. Beautiful in the sunshine.